19
Jul/092
Jul/092
Pedal Design Idea
Pedal Design
Here is my proposed Pedal Design idea. I plan to remove the pedals from the current plastic housing and mount them onto sturdier aluminium. Around 300mm x 250mm x 6mm. I will attach the remaining two pedals with two bolts – one at either end of the metal pedal base. Since the current Pedal housing leaves your foot around an inch off the ground, I will build a double step of Aluminium at the front to enable me to reach the pedals in the same way as I do currently. Then I will lay a carbon fibre vinyl over the top of the foot rest. The cables will be tied around and fixed into place at the back, leave nothing untidy.
Enjoy this article?
Comments (2)
Trackbacks (0) ( subscribe to comments on this post )
Leave a comment
No trackbacks yet.
6:23 pm on July 21st, 2009
The way your planning the pedals your gonna struggle to get a good feel – your best putting them heading towards more vertical like what would be in a single seater cockpit. It won’t feel weird at all and will feel more natural.
1:11 am on July 22nd, 2009
The pedals should be at the same angle as the current G25 ones. In essence Im just taking them out and mounting them on aluminium. The angle is just my poor drawing skills!