Aug/092
More Materials Ordered
-
- Spacer Drawing
-
- Metal Letter Punch Set
-
- Acrylic Rod
Tonight I’ve ordered a metal letter punch set. I want to punch the letters into the Aluminium button box and this is definitely the best way to do it. It was only about £8.99 for a 37pc set.
As for the buttons on the button box, I’ve decided against the Steel Coach Bolts. Although they would work, I think they might be a little bit too heavy for buttons. After all, they’re steel!
I’ve ordered a 1M section of 8mm Acrylic Rod. Which will be the perfect size, easier to cut and a lot lighter.
The same company I ordered the rod from to customising services, so I’ve sent off a CAD drawing to them for the spacers I want to use to attach the Momo 12C. I asked for 4 x 3mm discs with the holes drilled for me. Shouldn’t be too expensive, since a 50×50cm sheet of Acrylic costs £2.49 from their shop!
Costs:
- Acrylic Rod – £2.06
- Punch Set – £8.99
Links to the products:
Enjoy this article?
Leave a comment
No trackbacks yet.
10:21 pm on August 6th, 2009
Better way, to calculate the holes postition.
[IMG]http://www.pointer4.extra.hu/Wheel/pmomo-mod.JPG[/IMG]
10:23 pm on August 6th, 2009
I don’t actually have the wheel yet, and that diagram has been pre-drawn by Steven Jones. So I assume its to scale
Thanks v.much for that link though, that will definitely help when I come to drill the actual steering wheel.